AT0017 – Tools and Power Tools Store

AIR DIE GRIND. SERVICE KIT ROTOR BLADES (21) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:16:53 +0000

AirCraft Air Die Grinder Service Kit Rotor Blades for AT0017 6mm Mini (AT0017-SK10)

At a Glance: Rotor blade (vane) service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—refreshes the pneumatic motor for better power and smoother running.

The AirCraft AT0017-SK10 Service Kit supplies replacement rotor blades (also called vanes) for the AT0017 6mm Mini Air Die Grinder. These blades slide in and out of the rotor slots inside the motor, creating the sealing action that turns compressed air into torque and speed. When vanes wear down, the motor loses efficiency—often showing up as reduced power, slower speed under load, and a tool that feels “flat” compared to how it used to run.
Replacing rotor blades is one of the most effective and affordable maintenance steps on a vane-type pneumatic motor. Fit fresh blades, lubricate correctly, and you’ll often feel an immediate improvement in response, smoothness, and overall performance.

The Blades That Make The Motor Work

Vanes are wear items by design. They seal against the cylinder wall as the rotor spins, so they gradually wear down. Fresh vanes restore that seal—improving airflow efficiency and bringing back the grinder’s punch.

AIR DIE GRIND. SERVICE KIT REPL. COLLET (30) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:16:45 +0000

AirCraft Air Die Grinder Service Kit Replacement Collet for AT0017 6mm Mini (AT0017-SK09)

At a Glance: Replacement collet service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—refreshes the clamping system so 6mm shank accessories grip firmly and run true.

The AirCraft AT0017-SK09 Service Kit supplies replacement collets for the AT0017 6mm Mini Air Die Grinder—ideal when your existing collet is worn, slipping, or no longer centring accessories properly. In a high-speed tool, the collet is a critical safety and performance component: it clamps the shank, keeps run-out under control, and prevents accessories from working loose under load.
If you’ve noticed accessories creeping, increased vibration, or a “wobble” that wasn’t there before, a fresh collet is often the quickest and most effective fix. This kit is designed around item 30 in the AT0017 parts diagram and is perfect for maintenance, rebuilds, and workshop users who want reliable clamping without drama.

Fresh Collets = Better Control

A worn collet can’t grip evenly, which increases run-out and vibration. Replacing it helps the accessory run straighter, improves finish quality, and makes the grinder feel more stable and predictable.

AIR DIE GRIND.SERVICE KIT BEARING COMP. (17/23/25/26) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:16:33 +0000

AirCraft Air Die Grinder Service Kit Bearing Components for AT0017 6mm Mini (AT0017-SK08)

At a Glance: Bearing component rebuild kit for the AirCraft AT0017 6mm Mini Air Die Grinder—restores smooth running, better alignment, and cleaner high-speed performance.

The AirCraft AT0017-SK08 Service Kit is the go-to rebuild pack when your AT0017 6mm Mini Air Die Grinder starts sounding rough, vibrating more than normal, or losing that smooth “free spin” feel. Bearings are the silent workhorses inside a high-speed air tool—when they wear, everything feels worse: more noise, more vibration, less control, and more stress on the motor parts.
This kit replaces the key bearing-related components in the AT0017 assembly so you can restore correct support and alignment. It’s an ideal fix during routine servicing, and a smart add-on when you’re rebuilding the motor core—because new rotor/cylinder parts deserve healthy bearings to match.

Smooth Rotation Starts With Good Bearings

Bearings and support bushings keep the rotating assembly running true. Refreshing these parts helps reduce run-out, improves control, and can dramatically cut down vibration—especially noticeable on precision work.

AIR DIE GRIND. SERVICE KIT COLLET FIXING COMP. (27-29/31) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:16:24 +0000

AirCraft Air Die Grinder Service Kit Collet Fixing Components for AT0017 6mm Mini (AT0017-SK07)

At a Glance: Collet fixing service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—includes the key front-end clamping components to restore secure accessory holding.

The AirCraft AT0017-SK07 Service Kit is built for the part of your AT0017 6mm Mini Air Die Grinder that takes the most day-to-day stress: the collet fixing and front-end assembly. If the collet system no longer grips properly, accessories slip, the front end feels loose, or threads are worn from years of tightening and loosening, this kit is the correct repair route.
A die grinder spins fast, so the collet assembly needs to be secure and correctly aligned. This kit replaces the core collet fixing components (items 27–29 and 31), helping restore proper seating, correct clamping action, and a smoother, safer feel when running 6mm shank accessories.

Secure Clamping = Smooth, Safe Grinding

When the clamping system is worn, run-out and vibration go up—and so does the risk of an accessory working loose. Replacing the collet fixing components as a matched kit helps bring the front end back to tight, accurate operation.

AIR DIE GRIND. SERVICE KIT ROTAR & CYLINDER COMP. (18-20/22/24) FOR AT

Pro-Connect — Mon, 01 Jun 2026 17:16:14 +0000

AirCraft Air Die Grinder Service Kit Rotor & Cylinder Components for AT0017 6mm Mini (AT0017-SK06)

At a Glance: Motor core rebuild kit for the AirCraft AT0017 6mm Mini Air Die Grinder—includes key rotor and cylinder components to restore performance.

The AirCraft AT0017-SK06 Service Kit is the “bring it back to life” kit for the heart of your AT0017 6mm Mini Air Die Grinder. This kit focuses on the rotor and cylinder component group—the parts that convert compressed air into high-speed rotation. When these components wear, you’ll feel it: loss of power, rough running, extra vibration, inconsistent speed, and an overall “tired” tool.
By replacing the key motor components as a matched set, you restore correct fit and airflow efficiency inside the vane-type motor. That means smoother rotation, better response, and less stress on bearings, plates, and vanes. If you’re doing a proper rebuild, this is the kit that tackles the core of the problem—rather than chasing symptoms.

The Motor Core Rebuild That Matters

Rotor and cylinder parts wear together. Replacing them as a kit helps restore alignment and sealing surfaces, which improves efficiency and gives your mini die grinder that crisp, high-speed feel again.

AIR DIE GRIND. SERVICE KIT EXHAUST & AIR INLET (15/16) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:16:05 +0000

AirCraft Air Die Grinder Service Kit Exhaust & Air Inlet for AT0017 6mm Mini (AT0017-SK05)

At a Glance: Service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—includes the exhaust ring and air inlet components to refresh airflow and connection integrity.

The AirCraft AT0017-SK05 Service Kit is a practical refresh kit for two high-use areas on the AT0017 6mm Mini Air Die Grinder: the air inlet connection and the exhaust section. If your grinder’s inlet threads are damaged, the fitting is leaking, or the exhaust components are worn or missing, this kit gets the tool back to a secure, tidy and reliable airflow setup.
Good airflow in and clean exhaust out is what keeps pneumatic tools responsive and efficient. Replacing these parts helps reduce annoying leaks, improves overall control, and keeps your grinder behaving properly in daily workshop use—especially when the tool has seen lots of hose changes and hard service.

Air In. Air Out. Tool Happy.

Pneumatic tools are all about controlled airflow. A solid air inlet connection helps prevent pressure loss and leaks, while a correct exhaust component keeps airflow moving the way the tool was designed to—smoothly and consistently.

AIR DIE GRIND. SERVICE KIT VALVE O-RING (8/9/13) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:15:55 +0000

AirCraft Air Die Grinder Service Kit Valve O-rings for AT0017 6mm Mini (AT0017-SK04)

At a Glance: Valve O-ring service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—replaces the key valve seals that keep airflow controlled and leak-free.

The AirCraft AT0017-SK04 Service Kit is a seal refresh for the valve section of your AT0017 6mm Mini Air Die Grinder. O-rings might be small, but they’re the unsung heroes of pneumatic tools—keeping air where it should be, maintaining pressure control, and helping the valve action feel smooth and consistent.
When valve O-rings wear, harden, or nick, the symptoms are usually obvious: hissing leaks, inconsistent trigger response, poor shut-off, and wasted compressed air. This kit includes the key valve O-rings (items 8, 9 and 13) so you can reseal the valve assembly properly and bring the tool back to clean, dependable operation.

Seal It Properly, Run It Properly

A fresh set of O-rings restores the valve’s ability to regulate airflow accurately. That means fewer leaks, better control, and a tool that responds the way it should—especially important on a small, high-speed mini die grinder.

AIR DIE GRIND. SERVICE KIT VALVE COMP. (10-12/14) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:15:45 +0000

AirCraft Air Die Grinder Service Kit Valve Components for AT0017 6mm Mini (AT0017-SK03)

At a Glance: Valve component service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—replaces key valve parts to restore consistent control and dependable shut-off.

The AirCraft AT0017-SK03 Service Kit is made to refresh the valve assembly inside your AT0017 6mm Mini Air Die Grinder—the part of the tool that controls airflow, response, and shut-off behaviour. When valve parts wear or contamination builds up, you’ll often see classic symptoms: sticky throttle action, inconsistent speed, air leaks, poor response, or a grinder that doesn’t shut off as crisply as it should.
This kit combines the essential valve components (including the valve stem and spring elements, plus the related plug/retainer as shown) so you can rebuild the valve section properly. It’s the right fix for bringing back smooth control, reliable operation, and that satisfying “on/off” confidence in your hand.

Airflow Control Is Performance Control

In a pneumatic tool, the valve assembly is the gatekeeper. Refreshing worn valve components helps reduce leaks, improves response, and ensures the tool stops when you release the trigger—simple, safe, and effective.

AIR DIE GRIND. SERVICE KIT TRIGGER COMP. (3-7) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:15:36 +0000

AirCraft Air Die Grinder Service Kit Trigger Components for AT0017 6mm Mini (AT0017-SK02)

At a Glance: Trigger component service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—replaces key trigger parts to restore crisp, dependable throttle control.

The AirCraft AT0017-SK02 Service Kit is designed to refresh the trigger and throttle control section of your AT0017 6mm Mini Air Die Grinder. When a die grinder starts feeling “off” at the trigger—sticky movement, inconsistent response, poor return action, or unreliable shut-off—the cause is often wear in the trigger components (and sometimes dirt that has worked its way into the mechanism).
This kit replaces the key trigger components for the AT0017 series, helping you bring back smooth, predictable control. That means easier feathering for delicate work, safer operation, and a tool that reacts the way your hand expects it to—no surprises, no wrestling match.

Control Is A Safety Feature

A clean, responsive trigger isn’t just “nice to have”—it’s part of safe, accurate grinding. Replacing worn trigger components helps restore reliable shut-off and gives you more confidence when working in tight spaces.

AIR DIE GRIND. SERVICE KIT MAIN HOUSING (1/2) FOR AT0017

Pro-Connect — Mon, 01 Jun 2026 17:15:25 +0000

AirCraft Air Die Grinder Service Kit Main Housing Components for AT0017 6mm Mini (AT0017-SK01)

At a Glance: Main housing service kit for the AirCraft AT0017 6mm Mini Air Die Grinder—includes the key body/housing components needed for a solid rebuild.

The AirCraft AT0017-SK01 Service Kit is the smart way to rebuild the front-end body and housing section of your AT0017 6mm Mini Air Die Grinder in one go. If the grinder has taken knocks, the casing threads are worn, or the housing components are damaged or missing after years of hard workshop use, this kit brings back the structure your tool needs to run correctly.
A die grinder isn’t just about the motor—alignment, seating, and protection all start with the housing. This service kit is designed to suit the AirCraft AT0017 series and helps restore proper fitment so internal parts stay positioned correctly, the tool feels solid in the hand, and servicing becomes easier and cleaner.

Rebuild The Foundation, Not Just The Symptoms

Worn housings can cause misalignment, vibration, and poor component seating. Replacing housing components as a matched kit helps restore the tool’s structure so everything inside can do its job properly.