The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.

By allowing the wood panel to float, it can expand and contract without
damaging the door. A typical panel would be cut to allow 5 mm between itself and
the bottom of the groove in the frame.

A raised panel has a profile cut into its edge so that the panel surface is
flush with or proud of the frame. Some popular profiles are the ogee, chamfer,
and scoop or cove.

This router bit is for machining of traditional panels & frame doors with
heavy duty routers mounted in fixed positions, either inverted or overhead.
These Raised Panel cutters perform best at lower speeds. They are all suitable
for use on natural timbers and MDF (medium density fibre board).

PRO-TECH
router bits are manufactured in Taiwan.

The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.

By allowing the wood panel to float, it can expand and contract without
damaging the door. A typical panel would be cut to allow 5 mm between itself and
the bottom of the groove in the frame.

A raised panel has a profile cut into its edge so that the panel surface is
flush with or proud of the frame. Some popular profiles are the ogee, chamfer,
and scoop or cove.

This router bit is for machining of traditional panels & frame doors with
heavy duty routers mounted in fixed positions, either inverted or overhead.
These Raised Panel cutters perform best at lower speeds. They are all suitable
for use on natural timbers and MDF (medium density fibre board).

PRO-TECH
router bits are manufactured in Taiwan.

Carbide
Tipped

This
router bit is used for creating a single bead (also referred to as a reed) with
fillets and a rounded edge with the same radius to give a classic rounded off finish
in one pass.

• Control cut design helps minimize kickback
• Smooth edge requires little or no sanding before applying a finish

PRO-TECH
router bits are manufactured in Taiwan.

Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
profile, or just a portion of it to achieve the look you want.

The timber
is held securely against the fence and the bit makes the cut. This leaves you free
to feed the timber steadily – and your hands can safely be a long way from the cutters.
Plan to cut the profile in several passes – taking only a small amount off on the
last cut to get the best quality. Features two flutes and a ³/₈‘
ball bearing guide.

This two-flute router bit is well balanced, eliminating vibration that degrades
the cut finish.

PRO-TECH
router bits are manufactured in Taiwan.

With large diameter router bits best results are obtained by making several light passes,
increasing depth of cut with each pass. In order to minimize burning on some woods such as
cherry, maple or oak, the Router Speed Control can be used to reduce the router speed.

PRO-TECH
router bits are manufactured in Taiwan.

Router bit spare part

High-Speed
Steel

The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.

The Forstner bit is guided by the wide outside rim, whereas other wood
drill bits are guided by the tip. For this reason, the drill bit can be used
with a drill press to drill angled or partially overlapped holes.

Tungsten Carbide – Handrail set

This router bit has a 12.7mm shank (shaft)
that will fit most large routers with the correct collet. Please ensure that
you select a router bit with a shank (shaft) size that will fit into your router
collet.

Cabinet door set – Ogee and bevel profile

The cutter set is designed to be used in a router table.

This router bit has a 12.7mm shank (shaft)
that will fit most large routers with the correct collet. Please ensure that
you select a router bit with a shank (shaft) size that will fit into your router
collet.

Take care when working with end grain. A sacrificial off-cut piece of wood
should be placed behind the wood to be cut to prevent horrendous tear out.

Cabinet door set – Ogee profile