SG H2000 Spare – Tools and Power Tools Store

SPARE PLASTIC CUP FOR THE SG H2000 IN SG KIT03

Pro-Connect — Wed, 03 Jun 2026 01:17:57 +0000

AirCraft Spare Plastic Cup SG-H2000T For The SG-H2000 In SG-KIT03

At a Glance: Replacement plastic fluid cup with measurement marks—made for the AirCraft SG-H2000 spray gun in SG-KIT03.

The AirCraft SG-H2000T Spare Plastic Cup is a replacement fluid cup/reservoir designed for the AirCraft SG-H2000 spray gun (as supplied in SG-KIT03).
It’s the part that takes the knocks: paint drips, solvent rinses, overtightened lids, and the occasional “oops” drop onto a concrete floor. When the original cup becomes cracked, cloudy, or starts leaking at the threads, replacing the cup restores clean feeding and helps keep your spray work consistent.
With handy volume markings, it also makes mixing and repeatable fill levels easier—especially when you’re trying to keep finishes consistent from one job to the next.

Fresh Cup, Cleaner Spraying: the SG-H2000T Replacement Reservoir

A sound, leak-free cup helps maintain smooth paint flow and reduces mess around the gun body and air passages.
Match the Cat No. SG-H2000T to ensure correct fitment for the SG-H2000 in SG-KIT03.

SG H2000 SERVICE KIT WASHERS & O-RINGS (3/6/7/ 13/15/16)

Pro-Connect — Wed, 03 Jun 2026 01:17:50 +0000

AirCraft SG-H2000 Service Kit Washers & O-rings SG-H2000-SK05

At a Glance: Complete seal refresh kit—washers and O-rings for key points on the SG-H2000 to prevent leaks and keep airflow/fluid paths sealed.

The AirCraft SG-H2000-SK05 Service Kit is a seal set of washers and O-rings for the AirCraft SG-H2000 spray gun, covering the specified parts (3, 6, 7, 13, 15 and 16).
In a spray gun, seals do the quiet, heroic work: they keep air where it should be, keep fluid where it should be, and stop both from leaking into places that ruin your day. With time, O-rings harden, flatten, swell from solvent exposure, or get nicked during servicing—leading to air leaks, paint seepage, inconsistent trigger feel, and poor shut-off.
This kit is the easiest way to restore sealing integrity across the key service points, helping your SG H2000 run clean, consistent, and leak-free again.

Stop Leaks at the Source: the SG H2000-SK05 Seal & Washer Kit

New O-rings and washers help restore correct sealing and pressure stability—critical for consistent atomisation and predictable spraying.
Match the Cat No. SG H2000-SK05 and the parts reference (3, 6, 7, 13, 15, 16) to confirm fitment for your SG H2000.

SG H2000 SERVICE KIT PATERN ADJ. PARTS (19-21)

Pro-Connect — Wed, 03 Jun 2026 01:17:47 +0000

AirCraft SG H2000 Service Kit Pattern Adjustment Parts SG H2000-SK04

At a Glance: Pattern (fan) adjustment service kit with adjuster components and seal—brings back smooth fan control on the SG H2000.

The AirCraft SG H2000-SK04 Service Kit is a replacement pattern adjustment parts kit for the AirCraft SG H2000 spray gun, covering the specified components (Parts 19–21).
Pattern adjustment is what lets you control the spray shape—narrow for detail work, wider for quicker coverage. If the pattern adjuster becomes worn, stiff, damaged, or leaky, the gun can struggle to hold a consistent fan, the adjustment becomes unpredictable, and spray results can swing from “nice finish” to “why is it doing that?”.
This kit refreshes the core fan/pattern adjustment components (including the adjuster and seal) so you can set the spray pattern accurately and keep it stable while you work.

Stable Fan Control, Cleaner Results: the SG H2000-SK04 Pattern Adjuster Kit

A healthy pattern adjuster helps you tune the gun to the job—wide fan for panels, narrow pattern for edges and detail—without drift or leaks.
Match the Cat No. SG H2000-SK04 and the parts reference (19–21) to confirm correct fitment for your SG H2000.

SG H2000 SERVICE KIT FLUID ADJ. PARTS (3-7, 10-12)

Pro-Connect — Wed, 03 Jun 2026 01:17:44 +0000

AirCraft SG-H2000 Service Kit Fluid Adjustment Parts SG-H2000-SK03

At a Glance: Fluid adjustment service kit with needle, adjuster parts and spring/seals—built to bring back clean flow control on the SG-H2000.

The AirCraft SG-H2000-SK03 Service Kit is a replacement fluid adjustment parts kit for the AirCraft SG-H2000 spray gun, covering the specified components (Parts 3–7 and 10–12).
These are the parts responsible for controlling paint/fluid delivery—where the needle moves, seats, and gets adjusted for flow. When this area wears or gets damaged, you’ll usually see the classic spray-gun problems: inconsistent flow, poor shut-off (dripping), a trigger that feels “notchy”, or an adjuster that won’t hold its setting.
This kit refreshes the core fluid adjustment mechanism so you can regain smooth, predictable control over how much coating is delivered—helping you produce cleaner finishes with less overspray and less rework.

Rebuild Fluid Control Properly: the SG-H2000-SK03 Service Kit

Instead of swapping one part at a time, this kit lets you service the key needle/adjuster components together—critical for proper sealing and consistent spray performance.
Match the Cat No. SG-H2000-SK03 and the parts reference (3–7, 10–12) to confirm fitment for your SG-H2000.

SG H2000 SERVICE KIT AIR ADJ. PARTS (22)

Pro-Connect — Wed, 03 Jun 2026 01:17:41 +0000

AirCraft SG-H2000 Service Kit Air Adjustment Parts SG-H2000-SK02

At a Glance: Air adjustment service kit (Part 22) with adjuster knob, spring and seal components to bring back smooth, controllable airflow on the SG-H2000.

The AirCraft SG-H2000-SK02 Service Kit is a replacement air adjustment parts kit for the AirCraft SG-H2000 spray gun, listed for Part 22.
The air adjuster is what lets you fine-tune airflow at the gun—useful for controlling atomisation, reducing overspray, and matching the gun to different coatings and working distances. When the adjuster gets damaged, stiff, leaky, or won’t hold its setting, spraying becomes a guessing game: too much air, not enough air, or inconsistent delivery from one pass to the next.
This kit replaces the key adjuster components (including the knob/adjusting screw, spring and seal) so you can regain smooth adjustment and stable airflow control.

Dial In Atomisation: the SG-H2000-SK02 Air Adjuster Service Kit

Good air control is the difference between a controlled, even coat and a dusty overspray cloud. Refresh the air adjuster components and the SG-H2000 becomes predictable again.
Match the Cat No. SG-H2000-SK02 and the parts reference (Part 22) to confirm fitment for your SG-H2000.

SG H2000 SERVICE KIT TRIGGER PARTS (13-18, 24-27)

Pro-Connect — Wed, 03 Jun 2026 01:17:38 +0000

AirCraft SG-H2000 Service Kit Trigger Parts SG-H2000-SK01

At a Glance: Trigger service kit with key pins, spring, valve parts and seals to bring your SG-H2000 trigger mechanism back to smooth, reliable control.

The AirCraft SG-H2000-SK01 Service Kit is a dedicated trigger parts repair kit for the AirCraft SG-H2000 spray gun, covering the specified internal components (Parts 13–18 and 24–27).
Over time, the trigger and valve area takes a beating: repeated cycles, paint residue, solvent exposure, and small parts that wear or go missing during cleaning. When those tiny components start failing, the symptoms are loud and clear—sticky trigger feel, poor return action, air leaking at rest, inconsistent flow, or a gun that simply won’t behave.
This service kit is the smart way to refresh the heart of the trigger mechanism in one go, restoring smooth trigger action, proper valve sealing, and predictable spray control.

Rebuild the Trigger Mechanism Properly: the SG-H2000-SK01 Service Kit

Instead of chasing one missing pin or a tired spring, this kit gives you the core trigger/valve pieces and sealing parts needed for a solid service rebuild.
Match the Cat No. SG-H2000-SK01 and the part reference (13–18, 24–27) to confirm correct fitment for your SG-H2000.

PLASTIC CUP FOR H2000 SPRAY GUN

Pro-Connect — Wed, 03 Jun 2026 01:17:35 +0000

AirCraft Plastic Cup SG-H2000-8 For H2000 Spray Gun

At a Glance: Replacement plastic fluid cup with screw-on cap—keeps your AirCraft H2000 spray gun ready for clean, consistent spraying.

The AirCraft SG-H2000-8 Plastic Cup is a replacement fluid cup/reservoir for the AirCraft H2000 spray gun.
The cup is where the mess begins and ends: it holds your coating, feeds the gun, and gets exposed to cleaning solvents, knocks, drops, and over-tightened lids. When the original cup becomes cracked, cloudy, or starts leaking at the threads, you’ll notice it immediately—drips, inconsistent feeding, and paint where it definitely shouldn’t be.
Fit a fresh SG-H2000-8 cup and your setup goes back to tidy, reliable feeding—so you can focus on smooth coats instead of chasing leaks and blockages.

Fresh Cup, Better Flow: the SG-H2000-8 Replacement Reservoir

A clean, undamaged cup helps maintain steady fluid feed and reduces contamination from dried paint flakes.
Match the Cat No. SG-H2000-8 to ensure correct fitment for the H2000 spray gun.

NEEDLE PLASTIC FOR H2000 SPRAY GUN

Pro-Connect — Wed, 03 Jun 2026 01:17:29 +0000

NEEDLE PLASTIC FOR H2000 SPRAY GUN

SPARE NOZZLE KIT 1.0MM FOR SG H2000

Pro-Connect — Wed, 03 Jun 2026 01:16:59 +0000

AirCraft Spare Nozzle Kit 1.0mm SG H2000-3 For SG H2000

At a Glance: 3-piece 1.0mm nozzle set (needle, nozzle and air cap) for the SG H2000—ideal when you want a bit more flow and fewer clogging hassles.

The AirCraft SG H2000-3 Spare Nozzle Kit 1.0mm is a replacement nozzle set for the AirCraft SG H2000 spray gun/airbrush.
This kit contains the key wear parts that determine how well your gun sprays: the needle, fluid nozzle, and air cap. When these parts wear, get scratched, or become blocked with dried material, spray quality drops fast—spitting, uneven patterns, poor atomisation, or a gun that drips because it won’t seal properly.
A 1.0mm setup offers a practical balance: it’s typically more forgiving than finer nozzles, supports a stronger flow, and can be easier to keep running clean when you’re spraying thicker materials (coating dependent). Fit a fresh kit and you’re back to consistent, predictable spraying.

More Flow, Less Fuss: the SG H2000-3 1.0mm Nozzle Set

The 1.0mm size is a solid choice when you want smoother flow and reduced clogging risk compared to very fine nozzles—while still maintaining good control.
Match the Cat No. SG H2000-3 to ensure correct fitment for the SG H2000.

SMALL GASKET FOR SG H2000-26

Pro-Connect — Wed, 03 Jun 2026 01:16:53 +0000

SMALL GASKET FOR SG H2000-26