SG H827 Spare – Tools and Power Tools Store

SG H827 SERVICE KIT AIR ADJ. VALVE ASSEMBLY PART (29)

Pro-Connect — Wed, 03 Jun 2026 01:19:09 +0000

AirCraft SG-H827 Service Kit Air Adjustment Valve Assembly SG-H827-SK06

At a Glance: Air adjustment valve assembly (Part 29) for the SG-H827—lets you fine-tune airflow for cleaner atomisation and consistent spraying control.

The AirCraft SG-H827-SK06 Service Kit is an air adjustment valve assembly for the AirCraft SG-H827 spray gun, listed for the specified component (Part 29).
This valve is your fine-control dial for air delivery. It helps you balance atomisation and overspray by adjusting airflow to suit your coating, nozzle size and spraying distance. When the air adjustment valve is worn, sticky, damaged, or clogged with residue, it can become difficult to set accurately—or it may not hold its setting at all. That often shows up as inconsistent atomisation, changing spray texture, or a gun that feels “temperamental” from one pass to the next.
Replacing the air adjustment valve assembly brings back smooth adjustment, stable airflow and repeatable settings—so your SG-H827 behaves predictably again.

Fine-Tune Atomisation: the SG-H827-SK06 Air Control Valve

Stable airflow makes finishing easier: less spitting, fewer dry patches, and better control of overspray. Match the Cat No. SG-H827-SK06 and parts diagram reference (Part 29) to confirm fitment for your SG-H827.

SG H827 SERVICE KIT WASHERS & O-RINGS

Pro-Connect — Wed, 03 Jun 2026 01:19:06 +0000

AirCraft SG-H827 Service Kit Washers And O-Rings SG-H827-SK05

At a Glance: Complete washer and O-ring seal set for the SG-H827—ideal for stopping leaks and refreshing sealing points during a full service.

The AirCraft SG-H827-SK05 Service Kit is a replacement washers and O-rings seal kit for the AirCraft SG-H827 spray gun.
Seals are the quiet heroes of a spray gun: they keep air where it should be, keep paint where it should be, and stop solvent from creeping into places that cause sticking, corrosion, or inconsistent performance. Over time, O-rings and washers can flatten, swell, crack, or harden—especially with regular solvent cleaning. When that happens you’ll often see leaks, air hissing, inconsistent atomisation, or parts that won’t tighten and seal like they used to.
This kit provides the replacement sealing components (as pictured) to refresh the critical sealing points on the SG-H827, making it the smart choice for maintenance, rebuilds, or troubleshooting persistent leaks.

Stop Leaks and Restore Performance: the SG-H827-SK05 Seal Kit

Fresh seals help stabilise airflow and fluid flow—two things that instantly show up in the quality of your finish. Match the Cat No. SG-H827-SK05 to confirm correct fitment for your SG-H827 spray gun.

SG H827 SERVICE KIT FLUID ADJ. PARTS (32-34)

Pro-Connect — Wed, 03 Jun 2026 01:19:03 +0000

AirCraft SG-H827 Service Kit Fluid Adjustment Parts SG-H827-SK04

At a Glance: Fluid adjustment service kit (Parts 32–34) to rebuild the SG-H827 fluid control—smooth adjustment, steady flow and predictable spraying results.

The AirCraft SG-H827-SK04 Service Kit is a replacement fluid adjustment parts kit for the AirCraft SG-H827 spray gun, covering the specified components (Parts 32–34).
The fluid adjuster is the “tap” that controls how far the needle can travel—meaning it controls how much paint the gun can deliver. When these parts wear, get damaged, or become sticky with dried coating, the adjuster can feel rough, won’t hold its setting, or delivers unpredictable flow (too little one moment, too much the next). That’s when finishes start suffering: dry spray, orange peel, runs, and general inconsistency.
This kit replaces the key fluid adjustment components (including the adjuster needle/screw assembly and spring as pictured), helping your SG-H827 regain smooth, accurate adjustment and stable, repeatable paint flow.

Control the Flow Like a Pro: the SG-H827-SK04 Fluid Adjuster Service Kit

Fine control over fluid flow makes it easier to match the gun to your coating and spraying speed. Match the Cat No. SG-H827-SK04 and parts reference (32–34) to confirm correct fitment for your SG-H827.

SG H827 SERVICE KIT PATERN ADJ. PARTS (25-30)

Pro-Connect — Wed, 03 Jun 2026 01:19:00 +0000

AirCraft SG H827 Service Kit Pattern Adjustment Parts SG H827-SK03

At a Glance: Pattern (fan) adjustment service kit (Parts 25–30) to rebuild the SG H827’s pattern control—smooth turning, reliable sealing and consistent fan shape.

The AirCraft SG H827-SK03 Service Kit is a replacement pattern adjustment parts kit for the AirCraft SG H827 spray gun, covering the specified components (Parts 25–30).
Pattern adjustment is what lets you control the spray shape—narrow for detail work, wider for quicker coverage. When the pattern adjuster parts wear, get damaged, or become sticky with dried coating, the gun can struggle to hold a setting, the knob can feel rough, and the fan can become inconsistent (often showing heavy edges or a lopsided pattern).
This kit replaces the key pattern control components (including the adjuster knob, internal fitting and seal elements as pictured), helping the SG H827 return to smooth, predictable fan control and cleaner spraying results.

Dial In the Perfect Fan: the SG H827-SK03 Pattern Adjuster Service Kit

Proper pattern control helps you match the gun to the job—fine edges, panels, or broad coverage—without drift or leakage. Match the Cat No. SG H827-SK03 and the parts reference (25–30) to confirm correct fitment for your SG H827.

SG H827 SERVICE KIT AIR COMPRESSION PARTS (5-7)

Pro-Connect — Wed, 03 Jun 2026 01:18:57 +0000

AirCraft SG H827 Service Kit Air Compression Parts SG H827-SK02

At a Glance: Air compression/air valve service kit (Parts 5–7) with valve components, spring and seals—helps restore stable airflow and consistent spray results.

The AirCraft SG H827-SK02 Service Kit is a replacement air compression parts kit for the AirCraft SG H827 spray gun, covering the specified components (Parts 5–7).
These are the parts that manage airflow through the gun—often referred to as the air valve / air compression section. When this area wears or gets contaminated with residue, the spray gun can develop annoying symptoms: air leaking even when you’re not pulling the trigger, inconsistent atomisation, a trigger that doesn’t return crisply, or a spray pattern that changes randomly because airflow isn’t stable.
This kit replaces the key air valve components (including the valve body/fitting, spring and sealing washers as pictured), helping the SG H827 deliver clean, consistent airflow again—so your paint can atomise properly and your finish improves immediately.

Stable Airflow = Cleaner Atomisation: the SG H827-SK02 Air Valve Service Kit

Proper airflow control is the foundation of a smooth spray pattern. Match the Cat No. SG H827-SK02 and parts reference (5–7) to confirm correct fitment for your SG H827.

SG H827 SERVICE KIT TRIGGER PARTS (12-17)

Pro-Connect — Wed, 03 Jun 2026 01:18:54 +0000

AirCraft SG H827 Service Kit Trigger Parts SG H827-SK01

At a Glance: Trigger service kit (Parts 12–17) to rebuild the SG H827 trigger mechanism—smooth operation, better control and dependable shut-off.

The AirCraft SG H827-SK01 Service Kit is a replacement trigger parts kit for the AirCraft SG H827 spray gun, covering the specified components (Parts 12–17).
The trigger mechanism is where control lives: it translates your finger movement into needle movement and air valve action. When trigger parts wear, bend, loosen, or get contaminated with dried paint/solvent residue, the gun can feel rough, sticky or inconsistent—sometimes not returning cleanly, sometimes leaking air, and sometimes struggling with proper shut-off.
This service kit replaces the key trigger components (including the trigger lever, pins/clips and valve-related parts as pictured), bringing back smooth trigger travel and predictable spraying control.

Restore Smooth Trigger Feel: the SG H827-SK01 Trigger Service Kit

A healthy trigger mechanism improves control, reduces fatigue, and helps the gun return to a clean shut-off. Match the Cat No. SG H827-SK01 and parts reference (12–17) to confirm fitment for your SG H827.

SPARE ALUMINIUM CUP 800CC FOR SG H827/H887

Pro-Connect — Wed, 03 Jun 2026 01:18:51 +0000

AirCraft Spare Aluminium Cup 800cc SG H827-5 For SG H827 / H887

At a Glance: 800cc aluminium replacement paint cup for gravity-feed spraying—ideal for longer spray sessions and tougher workshop use.

The AirCraft SG H827-5 Spare Aluminium Cup (800cc) is a replacement paint cup for the AirCraft SG H827 and AirCraft H887 spray guns.
When you’re spraying bigger jobs, a solid cup matters: it needs to hold enough material, feed cleanly, and survive regular cleaning without cracking or deforming. Aluminium cups are a favourite in workshops because they’re durable, easy to clean, and less likely to get cloudy or brittle over time compared to plastic—especially when solvents are part of your daily routine.
This 800cc cup gives you extra capacity for longer spraying runs, helping reduce refills and keep your workflow smooth.

More Capacity, More Durability: the SG H827-5 800cc Aluminium Cup

A clean, rigid cup supports steady fluid feed and reduces contamination from old residue. Match the Cat No. SG H827-5 to confirm compatibility with your SG H827 or H887 spray gun.

SPARE PLASTIC CUP 600CC FOR SG H827/H887

Pro-Connect — Wed, 03 Jun 2026 01:18:48 +0000

AirCraft Spare Plastic Cup 600cc SG H827-4 For SG H827 / H887

At a Glance: 600cc replacement plastic paint cup for gravity-feed spraying—ideal when your original cup is cracked, cloudy or leaking.

The AirCraft SG H827-4 Spare Plastic Cup (600cc) is a replacement paint cup for the AirCraft SG H827 and AirCraft H887 spray guns.
Your spray gun is only as clean and reliable as the cup feeding it. A worn or cracked cup can cause leaks at the threads, contamination from old paint residue, and frustrating feed issues that show up as inconsistent spraying or random splutter. This 600cc gravity-feed cup restores a proper, clean reservoir so the gun can do what it’s meant to do—deliver a smooth, consistent coat.
Fit a fresh cup and you’ll spend less time cleaning up mess and more time laying down neat finishes.

Clean Feed, Less Mess: the SG H827-4 600cc Replacement Cup

A good cup helps maintain steady fluid feed and reduces contamination from dried paint flakes. Match the Cat No. SG H827-4 to confirm compatibility with your SG H827 or H887 spray gun.

SPARE NOZZLE KIT 2.0MM FOR H827

Pro-Connect — Wed, 03 Jun 2026 01:18:42 +0000

AirCraft Spare Nozzle Kit 2.0mm SG-H827-3 For H827

At a Glance: 2.0mm nozzle set for the H827—made for high-flow applications where you need to move more material fast (coating and setup dependent).

The AirCraft SG-H827-3 Spare Nozzle Kit 2.0mm is a replacement nozzle set for the AirCraft H827 spray gun.
The nozzle kit is the precision trio that decides whether your finish looks professional or painful: the needle, fluid nozzle and air cap meter material and atomise it into a controlled fan. As these parts wear, get scratched, or collect stubborn residue, the gun starts misbehaving—spitting, poor atomisation, uneven fan edges and dripping from a needle that no longer seals cleanly.
A 2.0mm setup is typically chosen when you want very high material flow for heavier coatings or faster coverage (application dependent). Fit a fresh nozzle set and your H827 can deliver stronger flow with better consistency and cleaner shut-off.

Maximum Flow, Restored Control: the SG-H827-3 2.0mm Nozzle Set

High-flow spraying only works when the needle/nozzle seal properly and the air cap atomises consistently. Match the Cat No. SG-H827-3 to ensure correct fitment for your AirCraft H827.

PAINT NEEDLE WASHER FOR H827

Pro-Connect — Wed, 03 Jun 2026 01:18:39 +0000

AirCraft Paint Needle Washer SG H827-21 For H827 Spray Gun

At a Glance: Small but critical sealing washer for the H827 needle area—helps prevent paint seepage and keeps needle travel smooth.

The AirCraft SG H827-21 Paint Needle Washer is a replacement washer used in the AirCraft H827 spray gun needle/packing area.
This washer forms part of the sealing stack that supports the needle and helps stop paint or solvent from creeping back through the body of the gun. When the needle washer is worn, flattened, damaged, or missing, you can get tell-tale issues like paint seepage around the needle area, a sticky needle feel, inconsistent shut-off, or a trigger that feels “gritty” rather than smooth.
Replacing the SG H827-21 is a simple maintenance step that restores proper sealing and helps the needle slide cleanly—keeping your spray gun tidy, responsive and consistent.

Better Sealing, Smoother Needle Action: the SG H827-21 Needle Washer

Correct needle sealing improves shut-off and reduces mess around the gun body. Match the Cat No. SG H827-21 to ensure correct fitment for your AirCraft H827 spray gun.